Village of Harrison Hot Springs Zoning Bylaw
1 zone definitions. 1 with development rules (height, FAR, setbacks).
Harrison Hot Springs has one zoning designation, the R1 Residential zone, which permits residential uses with a maximum height of 10.0 metres, floor area ratio of 0.5, front setback of 6.0 metres, rear setback of 7.5 metres, and side setback of 1.5 metres. The village is located in the Fraser Valley region of British Columbia, approximately 100 kilometres east of Vancouver and near Agassiz. Secondary suite regulations are not indicated in the available zone data. The specific zoning bylaw name or number is not identified in the zone information provided.
Region: British Columbia
| Zone Code | Zone Name | Category | Max Height | FAR | Front Setback | Rear Setback | Side Setback | Secondary Suite | Bylaw |
|---|---|---|---|---|---|---|---|---|---|
| R1 | Residential | residential | 10.0m | 0.5 | 6.0m | 7.5m | 1.5m | -- | Bylaw |
Zoning data extracted from municipal bylaw documents. Development rules may not reflect the most recent amendments. Always verify with Village of Harrison Hot Springs before making decisions.